Wika Pressure transmitter
The model A-10 pressure transmitter for general industrial applications is not only notable for its compact design, but it also offers excellent quali...
Superior pressure transmitter
The model S-20 pressure transmitter for general industrial applications is the ideal solution for customers with demanding measuring requirements. It ...
High-quality pressure transmitter
The model S-10 pressure transmitter for general industrial applications is the ideal solution for customers with demanding measuring requirements. It ...
OEM pressure transmitter
The model O-10 pressure transmitter has been developed for a wide variety of industrial applications. A large range of process and electrical connecti...
Flush pressure transmitter
Specialist for viscous and solids-containing media The model S-11 pressure transmitter with flush diaphragm has been specifically designed for the mea...
Model MG-1 Pressure transmitter
The model MG-1 pressure transmitter has been developed for the measurement of pressure with medical gases and for oxygen applications. Only materials ...
Pressure transmitter with output signals CANopen® and J1939
The long-standing experience of WIKA in the area of serial bus systems, and also with digital pressure transmitters has been incorporated into this in...
OEM pressure transmitter with thin-film technology
Shock and vibration resistance, resistance to pressure spikes (CDS system) and an ingress protection of up to IP 69K make the model MH-2 pressure tran...
Pressure Transmitter with thin film technology
The sensor is recessed into the pressure connection on to offer additional protection against oil loss should the sensor become damaged by misuse on s...
Pressure transmitter with ceramic measuring cell
...
Pressure transmitter with hermetically welded thin film measuring cell
...
Intrinsically safe pressure transmitter
Global explosion protection These pressure transmitters meet approvals such as ATEX, FM, CSA, which are relevant throughout the world. All data requir...
Intrinsically safe pressure transmitter
Global explosion protection These pressure transmitters meet approvals such as ATEX, FM, CSA, which are relevant throughout the world. All data requir...
Bourdon tube pressure gauge with electrical output signal
Design EN 837-1
Nominal size in mm 40 Accuracy
class 2.5 Scale ranges 0 ... 2.5 to 0 ... 10 bar Pressure limitation
Steady: 3/4 x full scale val...
Bourdon tube pressure gauge with electrical output signal
Design EN 837-1 Nominal size in mm 40 Accuracy class 2.5 Scale ranges 0 ... 2.5 to 0 ... 10 bar or all other equivalent vacuum or combined pressure an...
Bourdon tube pressure gauge with electrical output signal
Design EN 837-1 Nominal size in mm 40, 50 Accuracy class 2.5 Scale ranges 0 ... 1.6 to 0 ... 400 bar or all other equivalent vacuum or combined pressu...
Bourdon tube pressure gauge with USB interface
Design EN 837-1 Nominal size in mm 50 Accuracy class 2.5 Scale ranges 0 ... 1.6 to 0 ... 400 bar or all other equivalent vacuum or combined pressure a...
Bourdon tube pressure gauge with stepped electrical output signal
Design EN 837-1 Nominal size in mm 50 Accuracy class 2.5 Indication range 0 ... 400 bar Pressure limitation Steady: 3/4 x full scale value Fluctuating...
Diaphragm pressure gauge with electrical output signal
At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controll...
Diaphragm seal with threaded connection
Diaphragm seals are used to protect the pressure measuring instrument from aggressive, adhesive, crystallising, corrosive, environmentally hazardous o...
Electrical switch contacts
Switch contacts (electrical alarm contacts) make or break an electric control circuit dependent upon the position of the instrument pointer. The switc...
Control relay
Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical co...
Control unit
The WIKA inductive contact device is a contact-free device. Basically, it consists of an initiator, located on the nominal value pointer, including it...
Temperature transmitter
The model T24 temperature transmitter has been specifically designed for the application of a Pt100 with 2- or 3-wire connection or 4 ... 20 mA analog...
Analogue temperature transmitter
The analogue transmitters of the T19 series feature configurable measuring ranges and are intended to be used with resistance thermometers. Via the si...
Analogue Temperature Transmitters
The analogue temperature transmitters of the T91 family are geared to the special requirements of industrial applications. They are ideally suited for...
Digital temperature transmitter with HART® protocol
These temperature transmitters are designed for universal use in the process industry. They offer high accuracy, galvanic isolation and excellent prot...
HART® field temperature transmitter
The TIF series field temperature transmitters, consisting of a rugged field housing, model T32 temperature transmitter and a model DIH display, have b...
Float Switches with Permanent Magnet
A float with a permanent magnet moves reliably along with the liquid level on a guide tube. Within the guide tube is fitted a reed contact (inert gas ...
Electronic level switch with display
...
Orifice plate, Orifice flange, Annular chamber
Differential pressure flow meters are used in many industrial applications. As primary flow elements, orifice plates represent the most common solutio...
Venturi tube
A Venturi tube is a reliable and easily-managed and maintained instrument that can measure a wide range of clean liquids and gases. The main advantage...
Test pump, pneumatic
Areas of application Test pumps are used in generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measu...
Hydraulic comparison test pump
Test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments throug...
Hand-held pressure indicator
Extensive application possibilities Stainless steel pressure sensors with measuring ranges up to 1,000 bar are available for the model CPH6300 hand-he...
USB pressure transmitter
Extensive application possibilities The CPT2500 USB pressure transmitter is suitable for connection to any PC with a USB port, via the CPA2500 USB ada...
Precision Loop Calibrator
The Precision Loop Calibrator CEP1000 provides significantly extended performance when compared to any competitive calibrator. With an accuracy of 0.0...
Hand-held temperature calibrator
The model CEP3000 hand-held temperature calibrator is an ideal instrument to handle all your temperature calibration tasks in a rugged, inexpensive pa...
Barstock valve in stainless steel version
Barstock valves are suited to shutting off the impulse line and for mounting pressure measuring instruments. As a standard, the valves feature externa...
Monoflange for pressure measuring instruments
For connections to the process using connection flanges, the monoflange enables an optimal and compact measuring point assembly. In addition, stress f...
NEUMO BioControl®
The pharmaceutical grade BioControl® System is used to adapt pressure and temperature measuring instruments to pipelines and vessels. It has been spec...
Accessories for diaphragm seals
Stainless steel 1.4571 (block flange adapter) Heating pipeline (on model 910.23): steel St 35.8 l Stainless steel 316 L (saddle flange)...
Diaphragm Seal Accessories
For flanges per EN 1092-1 and ASME B 16.5 DN 50, 80, 100, 125 or NSP 2", 3", 4", 5" PN 16 ... 100 or Class 150 ... 600 Material St...
Magnetic quick connector
With the patented magWIK magnetic quick connector, all WIKA temperature transmitters can be safely and securely connected in the shortest of times wit...
Model GCx-08 Connecting parts with nominal width DN 8
Safe and simple operation
WIKA's connecting parts enable the secure storage and handling of environmentally hazardous SF6greenhouse gas in the equipm...
Model GCx-06 Connection parts with nominal width DN 6
Safe and simple operation
WIKA's connection parts enables the secure storage and handling of environmentally hazardous SF6greenhouse gas in the equip...
Model GCx-20 Connecting parts with nominal width DN 20
Safe and simple operation
WIKA's connecting parts enable the secure storage and handling of environmentally hazardous SF6greenhouse gas in the equipm...
Models GCH-08, GCH-20 Hoses for SF6 gas Nominal width DN 8 and DN 20
Safe operation
These hoses ensure the safe handling of the environmentally damaging greenhouse gas SF6. Each hose is fitted with self-sealing valves ...
Model GLTC10 combination valve Gas Leak Tight Connection 3-way combination valve
Keeping SF6gas inside circuit-breaker tanks during the filling process is nearly impossible without using a selfsealing coupling. This special 3-way v...
Model CPB3500 Pneumatic dead-weight tester
Proven primary standard
The model CPB3500 dead-weight tester is a genuine primary standard, which derives the measurement of pressure directly from i...
Model CPB3800 Pressure standard Dead-weight tester in compact design
Proven primary standard
Pressurestandards(dead-weight testers) are the most accurate instruments available on the market for the calibration of elect...
Model CPB3800HP Dead-weight tester High-pressure version
Proven primary standard
Pressure balances (dead-weight testers) are the most accurate instruments available on the market for the calibration of elec...
Model CPB5000 Pressure balance Pneumatic
Proven primary standard
Pressure balances(dead-weight testers) are the most accurate instruments available on the market for the calibration of elect...
Model CPB5800 Dead weight tester Hydraulic pressure balance
Proven primary standard
Dead weight testersare the most accurate instruments available on the market for the calibration of electronic or mechanical ...
Model CPB5000HP Pressure balance High-pressure version
Proven primary standard
Pressure balances (dead-weight testers) are the most accurate instruments available on the market for the calibration of elec...
Model CPB5600DP Pressure balance Differential pressure version
Proven primary standard
Pressure balances (dead-weight testers) are the most accurate instruments available on the market for the calibration of elec...
Model CPB6000 Primary standard pressure balance
Reference primary standards
Pressure balances are high-precision fundamental pressure standards that define the derived unit of pressure directly fro...
Model CPB6000DP Primary standard differential pressure balance
Reference primary standards
Pressure balances are high precision fundamental pressure standards that define the derived unit of pressure directly fro...
Model CPB8000 Automatic pressure balance
Reference primary standards
Pressure balances are high-precision fundamental pressure standards that define the derived unit of pressure directly fro...
Model CPD8000 Digital pressure balance
Reference primary standards
Pressure balances are high-precision fundamental pressure standards that define the derived unit of pressure directly fro...
Models 80, 80L Hydraulic pipeline tester
Accurate measurement of pressures
The hydraulic pipeline tester is a portable unit suitable for the accurate measurement of arbitrary and fluctuating...
Models CPU6000-W, CPU6000-S, CPU6000-M CalibratorUnit
The CPU6000 series is made up of three instruments: the model CPU6000-W weather station, the model CPU6000-S pressure balance sensor box and the model...
Model WIKA-Cal Calibration software
Creation of calibration certificates or logger protocols
The WIKA-Cal calibration software is used for generating calibration certificates or logger ...
Model 910.14 Gauge adapter for pressure measuring instruments
Male-female gauge adapters
are used where the size of the male thread is different from the female thread in the parts to be connected.
Female-femal...
Model 910.17 Sealings for pressure measuring instruments
These contact seals for static sealing surfaces achieve their effect through a high-enough surface pressure between the two threaded connections. The ...
Model 910.16 Instrument Mounting Brackets
Adapter
Process connection G ½ B / G ½ and ½ NPT per EN 837-1 from brass, steel or stainless steel 1.4571
Direct fitting instrument mounting bra...